Sennheiser Wireless Systems Manager now available

The Wireless Systems Manager 4.1 is available now for either PC or Mac as a free download here. Version 4.1 has a function that protects any selected frequency settings before the software calculates a new plan.

“The Fix Frequency function saves you a lot of work,” explains Tobias von Allwörden, product manager for professional wireless microphones. “When you need to recalculate a frequency set-up, simply select the devices that need to keep their assigned frequencies and the software will not touch these when it calculates a new frequency plan.”

The software now indicates the spacing between a microphone frequency and its neighbouring frequencies to the ‘left’ and the ‘right’, whether this is another carrier or an intermodulation product. This provides a better idea about how reliable a frequency is. If not all of your microphone and monitoring channels can be accommodated within a given spectrum window, the software will go below the recommended spacing but indicate this by marking the frequency red. In this case you could consider making this frequency a spare one or assigning it to a less important wireless link – or decide to move to another part of the spectrum altogether if possible.

Additionally, version 4.1 allows you to set your own individual noise threshold. If the power of an interfering source is below the selected threshold, the frequency it is on would still be good to use; if the interfering source is more powerful (i.e. above the threshold), its frequency will automatically be disregarded for the set-up. Tobias von Allwörden adds: “For example, if you know that the radio microphones at your event will only be used at very short distances from the receivers, you could put the threshold higher, recalculate the frequency set-up and thus win more usable frequencies.”

The new spacing function of WSM 4.1 helps you to judge the quality of a frequency


www.sennheiser.co.uk